Inline finishing

A diverse inline finisher lineup for added value

A wide range of inline finishing options are available that boast top-of-class professional specifications. They efficiently meet the needs of diverse output formats to enable services that can differentiate companies from the competition.

Flat-back full-bleed saddle-stitched bookbinding

Flat-back full-bleed
saddle-stitched
bookbinding

  • Catalogues
  • Pamphlets, etc.
Thick perfect bookbinding

Thick perfect
bookbinding

  • Manuals
  • Annual reports, etc.
Wide range of folding functions

Wide range of folding functions

  • DM
  • Pamphlets, etc.

 Highly functional inline options with professional specifications (optional)

Sophisticated saddle-stitched bookbinding

T-shape saddle stitcher SD-513

This unit provides all the refined saddle-stitching capabilities of an offset printing bookbinder when combined with Square Corner Forming unit FD-504, creaser unit CR-101 and trimmer unit TU-503.

  • Saddle stitch
  • 4-saddle stitch
  • Fore edge trim
  • Multi centre fold
  • Multi tri fold
  • Arch shaped clinch
  • Variable width stitch
  • Spine corner forming *1
  • Crease *2
  • Two side slits *3

*1: With FD-504 mounted *2: With CR-101 mounted *3: With TU-503 mounted

■Spine Corner Forming unit FD-504

This unit creates a spine corner for saddle-stitched booklets to reduce booklet swelling and allows adjustment of flat back strength.

■Creaser unit CR-101

The creaser unit applies creases to folding lines to prevent the toner from cracking for a neater finish.

■Trimmer unit TU-503

This unit trims both upper and lower edges and can produce full bleed booklets when used in combination with the standard fore edge trimming unit.

T-shape saddle stitcher SD-513

Space-saving all-in-one finisher

Staple finisher FS-532

The staple finisher is capable of stapling up to 100 sheets*1 and cutting the excess length from staple legs. With the saddle-stitcher option mounted, tasks such as multi tri-folding and centre folding can be performed in addition to saddle stitching. High paper alignment and a revised paper-feed path ensure a neat finish even for large numbers of stitched sheets. The unit can also be expanded with a punch and post inserter*2.

*1:
Stapling for up to 50 sheets of A3 paper.
*2:
Mount kit MK-732 required for installation.

Note: Some combinations of options are not compatible.

  • Corner stapling
  • 2-poing stapling
  • Staple cutter
  • Variable width stitch
  • Saddle stitch *3
  • Multi centre fold *3
  • Multi tri fold *3
  • 2-hole punch *4
  • Cover sheets *5
  • Sheet insertion *5

*3: With SD-510 mounted *4: With PK-522 mounted *5: With PI-502 mounted

Staple finisher FS-532

Perfect binding of up to 600 pages

Perfect binder PB-503

This unit provides a top-of-class perfect binding finish for up to 300 sheets/600 pages of 80gsm thickness up to a total binding thickness of 30mm. Paper up to 216gsm thick can be used for the cover and both printing and gluing can be performed inline. Sophisticated sheet alignment technology realises a neat finish even without three-edge trimming. Completed bound books are stacked automatically on a provided stacking cart.

  • Perfect binding
  • Cover insertion
  • Sheet insertion
  • Z fold insertion *1

*1: With FD-503 mounted

Perfect binder PB-503

For small-lot manuals, catalogues, etc.

Saddle stitcher SD-506

This saddle stitcher can create booklets of up to 50 sheets/200 pages (80gsm). A set-on-saddle mechanism allows stiff, accurate folding that decreases sheet misalignment during binding. Double-parallel and tri-fold functions, as well as a fore-edge cutting function that provides a neat finish, are standard equipped for efficient post-processing.

  • Saddle stitch
  • Multi centre fold
  • Multi tri fold
  • Fore edge trim

Saddle stitcher SD-506

Ample capacity for high work efficiency

Large-capacity stacker LS-506

Up to two stacker units that accommodate 5,000 sheets each can be installed side-by-side for a total 10,000-sheet capacity. Finished documents can be removed via cart for easy transport to the next process. A sample ejection function allows quality checks during high-volume printing.

  • Shifted output
  • Trolley stacker

Large-capacity stacker LS-506

Double-parallel folding, gate folding and more

Multi-folding unit FD-503

The FD-503 is a multi-function multi-folding unit capable of double-parallel folding, gate folding, centre folding, tri-folding and other tasks. It can quickly handle diverse jobs such as DM production. The unit is also furnished with 2 and 3-hole punching functions and a sheet-insert function. When combined with the PB-503, it can insert Z-folded pages in perfect bound books.

  • Centre fold
  • Tri fold in
  • Tri fold out
  • Z fold
  • Gate fold
  • double_parallel
  • 2-hole punch
  • 3-hole punch
  • Sheet insertion

Multi-folding unit FD-503

Low-cost high-capacity output tray

High-capacity output tray OT-510

The capacity of this low-cost output tray has been increased from 500 sheets to 4,200 sheets. It's a highly cost-effective initial investment for users with standalone post-processing equipment.

  • Shifted output
Large-capacity stacker LS-506