Saddle-stitcher [SD-513]

The [SD-513] is a saddle-stitcher that is capable of saddle-stitching of 300gsm thick paper (max.12 pages) in addition to volume pages up to 200 pages (64gsm paper for body pages). Expanded functions enable realisation of a highly-polished finish comparable to bookbinder used for offset printing. The booklet-shifting type stapling mechanism is capable of 4-point stapling and is also furnished with functions for such tasks as edge-trimming, multi centre fold and multi tri-fold.

■ Creasing function

Use of an optional Creaser unit [CR-101] enables creasing of up to four lines, which provides a high quality finish with less toner cracking for stand menus and sales promotional tools printed on thick paper.

■ Spine corner forming function

Mounting a Spine corner forming unit [FD-504], it is possible to create spine corners, which provide a high quality finish by reducing swelling of saddle-stitched booklets. Flat-shaped bookbinding also leads to reduction of work space and workload in transportation.

■ Three-edge trimming function

Use of Trimmer unit [TU-503] makes it possible to trim both the top and bottom edges of the sheet. Output of full bleed designs is made possible in hybrid use with a fore-edge trimming function that is standard equipment.

Ordinary saddle-stitching bookbinding

Saddle-stitching bookbinding with spine corner creation and 3-edge trimming

Finisher [FS-532]

The stapling finisher with staple cutter is capable of stapling up to 100*¹ sheets. Three sub-options can be mounted to expand the system to enable saddle-stitching, post-insertion and punching, making it possible to perform multiple operations in a small space.

*1

Max. 50 sheets for A3

*2

With SD-510 installed

*3

With PK-522 installed

*4

With PI-502 installed

Booklet making up to 600 pages

Perfect binder [PB-503]

Perfectly binds up to 600 pages or up to 30mm thick. Cardstock up to 216 gsm can be used for the cover to realise high-quality bookbinding through advanced paper alignment. In addition, use of Multi-folding unit [FD-503] enables insertion of Z fold sheets while perfect binding is in process. This enables flexible bookbinding work owing to the ability to insert A3 size drawing sheets in booklets such as reports and manuals.

*1

With FD-503 installed

For small lot manual and catalogue

Saddle-stitcher [SD-506]

Capable of saddle-stitch bookbinding of up to 200 pages (80gsm) and furnished as standard with an fore-edge trimming function, multi centre folding and multi tri-folding functions.

Finisher [FS-531/FS-612]

The FS-531 is capable of side stitching of a maximum of 50 sheets (80gsm), in addition to a side-stitching function, FS-612 is furnished with a saddle-stitching function and 2 types of folding functions for a maximum paper size of SRA3.
If necessary, the system can be expanded to include functions for tasks such as punching and cover sheet insertion.

*1

FS-612 only

*2

With PK-511 installed

*3

With PI-502 installed

Furnished with various folding functions

Multi-folding unit [FD-503]

TCapable of double parallel and gate fold, as well as normal centre fold, tri-fold, Z fold. Furnished with features useful for producing DMs such as a wide variety of folding functions, and 2- and 3-hole punching functions, as well as a sheet-inserter function capable of setting two different insert sheets.